jvm.options

[engineDir]/configuration/jvm.options

 1################################################################
 2# JVM options of the Axon.ivy Engine
 3################################################################
 4
 5# General settings
 6
 7-XX:-OmitStackTraceInFastThrow
 8
 9#----------------------------------------------------------------
10
11# Memory Settings
12# Xms represents the initial size of total heap space
13#
14# Xmx represents the maximum size of total heap space. 
15# Default is 2 GB which is fine for small installations. 
16# For medium or large installation this value has to be increased.
17# The heap space can be monitored in the Engine Cockpit. 
18# Have a look at Monitor > Engine > Memory
19
20-Xms128m
21-Xmx2g
22
23#----------------------------------------------------------------
24
25# Garbage collector
26
27-XX:+UseG1GC
28-XX:+UseStringDeduplication
29
30#----------------------------------------------------------------
31
32# Headless mode
33# no X11 environment is required
34
35-Djava.awt.headless=true
36
37#----------------------------------------------------------------
38
39# JMX Settings
40# enable these settings if you want to have JMX access from another
41# user on the same machine or from a remote host.
42
43#-Dcom.sun.management.jmxremote.port=9003
44#-Dcom.sun.management.jmxremote.login.config=jmx
45#-Djava.security.auth.login.config=configuration/jaas.config
46#-Dcom.sun.management.jmxremote.ssl=false
47#-Dcom.sun.management.jmxremote.autodiscovery=true
48
49# Define the port of the JMX remote object. 
50# The default value is a random port number.
51# Needs to be configured if the communication with the JMX client goes through a firewall. 
52# You can use the same port number as defined above for the RMI registry port (see com.sun.management.jmxremote.port).
53# You need to open both ports (com.sun.management.jmxremote.rmi.port and com.sun.management.jmxremote.port) on the firewall. 
54
55#-Dcom.sun.management.jmxremote.rmi.port=9003
56
57# Define the IP address or hostname a client can use to establish a connection
58# with this machine. The default value is the standard IP address of the machine.
59# Needs to be configured if the JMX client is in an 
60# external network and the communication with this machine is going through an external 
61# IP address with network address translation (NAT). 
62 
63#-Djava.rmi.server.hostname=<external IP address of the machine>
64
65# Define the IP address or hostname of this machine, on which
66# the JMX ports should be bound.
67# By default, the JMX ports are bounded to all IP addresses of the machine.
68
69#-Dcom.sun.management.jmxremote.host=<IP address of the machine>
70
71#----------------------------------------------------------------
72
73# Remote Debugging
74# enable these settings to activate Java remote debugging
75
76#-agentlib:jdwp=transport=dt_socket,server=y,address=*:8000,suspend=n